Browsing Tag Turbomachinery

• 

  Magazine Featured

  Steam is here to stay. Demand grows for small and medium-sized steam turbines

  Wherever heat is available and there is a demand for power, you are likely to find one of turbomachinery’s oldest and world-changing inventions – the industrial steam turbine ...

  On September 11, 2020 / By Rory Pasquariello
• 

  Featured Story

  How the turbomachinery industry is responding in the time of COVID-19

  Beyond sectors such as Liquefied Natural Gas (LNG) and pipeline compression, the gas turbine marketplace has not been thriving of late. But everything turned on its head in ...

  On May 7, 2020 / By Drew Robb
• 

  Featured Story

  START-UP & OPERATION OF TURBOCOMPRESSORS

  The cleanliness of the gas stream is a key factor in the trouble-free operation and reliability of any compressor. Corrosive, sour or contaminated gases require special provisions and ...

  On April 23, 2020 / By Amin Almasi
• 

  Featured Story

  ROTOFLOW TURBOEXPANDERS

  Darren Prosser, Global Business Manager for Aftermarket at Rotoflow, discusses his company and the products and services it offers in turbomachinery. Tell our readers about Rotoflow Rotoflow, an ...

  On April 16, 2020 / By TMI Staff & Contributors
• Featured Story

  STARTUP & OPERATION OF TURBOCOMPRESSORS

  The cleanliness of the gas stream is a key factor in the trouble-free operation and reliability of any compressor. Corrosive, sour or contaminated gases require special provisions and ...

  On April 14, 2020 / By Amin Almasi
• 

  Featured Story

  BAKER HUGHES UNFETTERED

  Baker Hughes moves on from GE, pushes A.I., digitalization, 3D printing and carbon capture. Baker Hughes merged with GE Oil & Gas a couple of years ago to ...

  On April 13, 2020 / By Drew Robb
• Featured Story

  MYTH: DATA CORRECTION: ALL I NEED ARE THE CURVES

  Testing turbomachinery requires corrections between actual test conditions and those originally specified as the acceptance, operating or design conditions. The factory or field test will usually be performed ...

  On April 9, 2020 / By Klaus Brun & Rainer Kurz
• Featured Story

  HOW TO ASSESS SAFETY AND PROTECTION LAYERS

  There are various ways to assess safety as well as a variety of layers of protection available for turbomachinery. A safety issue with a 100 kW centrifugal water ...

  On March 19, 2020 / By Amin Almasi
• 

  Featured Story

  GEAR TOOTH CONTACT PATTERN

  A REFINED METHOD BOOSTS THE QUALITY OF TOOTH CONTACT IN GEARBOXES By Dietmar Sterns It is important for gears to have the load distributed evenly over the face ...

  On March 17, 2020 / By TMI Staff & Contributors
• 

  Featured Story

  PowerGen International

  ENERGY STORAGE, HYDROGEN POWER, LUBRICATION AND CYCLING DOMINATE by Drew Robb PowerGen International remains the largest international event for the power industry. Held in New Orleans, LA in ...

  On March 10, 2020 / By Drew Robb